Please see the instructions below on how to fit your adhesive sheet.
PLEASE NOTE: You will require water and a sponge to help with the installation.

. Prepare the selected surface where the vinyl is to be fitted mang sure   that it is smooth, clean, dry and away from heat sources.

. Decide an exact location and measure the dimensions (height and width).
. Stretch the sheet on the floor and cut according to the previous measurements. [Tip: Always leave a margin of a few centimetres as it can be adjusted once it has been placed on the wall].

. Soak the sponge in water and apply on to the chosen location. Once the surface is wet, slowly position the sheet (always work from the top- down). 

. When the top of the sheet is correctly placed, work it by pressing from the top- downwards. If the sheet is wrongly positioned, remove it carefully and repeat the operation from the beginning. 

. Slowly, keep applying water on to the wall and keep working the sheet with your hands, until it is fixed in the correct position.

. If you wish to decorate a wider area, take another sheet and repeat the process above. Mount the second sheet to overlap the first until it matches the design. All designs have been created from a pattern so they can be matched on either side.

NOW YOU ARE READY TO ENJOY YOUR NEW ENVIRONMENT.

EASY!